After circuit bending, I'm spending most of my time on
cigar box guitars. Another fixation introduced by the oddly addictive
Make Magazine, they come in assorted flavors. This is my third. The body is a nice, large, cedar cigar box. I stripped most of the paper from inside, then notched both ends for the neck. It's a 3 foot oak 3x1,
as recommended. I cut a notch in the head and stuck in steel-string acoustic tuners. The tail is a little piece of brass, the bridge and nut are brass screws. I also glued in a piezo buzzer from Radioshack for a pickup. It works great. But I'm planning to make more, with proper frets. And maybe slightly lower action. Smaller screws, I guess...
Here's a closeup of the body. I used a 1/2" spade for the soundholes. I'm not a whiz with the drill, hence the messy results.
After circuit bending, I'm spending most of my time on cigar box guitars. Another fixation introduced by the oddly addictive Make Magazine, they come in assorted flavors. This is my third. The body is a nice, large, cedar cigar box. I stripped most of the paper from inside, then notched both ends for the neck. It's a 3 foot oak 3x1, as recommended. I cut a notch in the head and stuck in steel-string acoustic tuners. The tail is a little piece of brass, the bridge and nut are brass screws. I also glued in a piezo buzzer from Radioshack for a pickup. It works great. But I'm planning to make more, with proper frets. And maybe slightly lower action. Smaller screws, I guess...
Here's a closeup of the body. I used a 1/2" spade for the soundholes. I'm not a whiz with the drill, hence the messy results.
1 comment:
Very Cool. Looks like I know what my next project will be.
Post a Comment